標題: 轉換軚軨 [打印本頁] 作者: Frank 時間: 12-2-2015 22:34 標題: 轉換軚軨 HI, 各谷友師兄,本人想換軚軨由16吋變17吋,是否好複雜...因為問過軚鋪又話要加這些..又要改那些..我真係唔多明白..又怕佢換都一鑊粥連SENSOR都著埋燈..所以先問問大家有無提點?唔該哂. 作者: sinclair 時間: 13-2-2015 21:56
I am not sure about the sensor. The diameter of the tyre should remain the same before and after changing the rim. For example, if the tyre is 225/55/16 before, the new rim should be fitted with a tyre of either 225/45/17 or 225/40/17.
FYI, for a tyre of W/A/R spec, the diameter is calculated by (W*A% + R * 25.4) mm.
I hope this can help. 作者: rivkylai 時間: 16-2-2015 17:40
I know that R is the radius,
but how about W for what dimension and A for what dimension ?
Thx. for your reply !作者: Frank 時間: 17-2-2015 10:37
Great thanks for the useful information.作者: sinclair 時間: 19-2-2015 21:50
The unit for W is inch. A is percentage to the width, W, of the tyre. I hope this can help.
歡迎光臨 寶馬谷 - 香港寶馬車迷會 HK BMW Fans Club (https://forum.bmwfansclub.org/)